A close-up of the S-VINYL RAW substrate

Materials

Substrates and technical data for wallpaper, rugs, acoustic panels, ceramics and MDF.

Scroll to content

Wallpaper, ceramics, rugs and acoustic panels form one system of surface coverings, with designs printed in high definition. For each material, this page lists the substrates and technical data.

Wallpaper

The seven papers in the range and the KANT fabric are all printed with odourless inks. S-VINYL RAW, S-VINYL SATIN, S-TYPE II and S-FIBER are washable; S-BIOECO-RICE, S-GLIMMER, S-GOLD and KANT should be cleaned with a dry cloth only. Use only neutral detergents on the washable substrates.

The range includes three vinyl-coated non-woven papers (S-VINYL RAW, S-VINYL SATIN and S-TYPE II), a fibreglass paper for wet areas (S-FIBER), a recycled rice-starch cellulose wallcovering (S-BIOECO-RICE), a cellulose-polyester wallcovering with vinyl resin and mica powder (S-GLIMMER), a PVC-coated non-woven with gold finish (S-GOLD) and KANT, with a non-woven first layer and a second layer of Fil Posé silk-effect fabric.

All Styl’Editions materials are produced in Italy in compliance with European regulations.

S-VINYL RAW

Vinyl-coated non-woven

A canvas-weave texture in optical white that brings out the colour and depth of the design. Easily washed with water or neutral detergents, produced with odourless inks.

Vinyl wallpaper

Technical data

Roll
50/100 cmin 50 cm drops
Care
Washable
Reaction to fire
B-s2, d0
Certification
EN 15102:2007+A1:2011

S-VINYL SATIN

Vinyl-coated non-woven

A smooth, fine-grained surface, soft to the touch. The colour gives depth to the design and brings out the grain of the substrate. Easily washed with water or neutral detergents.

Vinyl wallpaper

Technical data

Roll
50/100 cmin 50 cm drops
Care
Washable
Reaction to fire
B-s1, d0
Certification
IGI Quality Mark Certificate · MZD-IMO

S-TYPE II

Vinyl-coated non-woven

Washable vinyl-coated non-woven, certified to ASTM F793 Category V.

Vinyl wallpaper

Technical data

Roll
50/100 cmin 50 cm drops
Care
Washable
Reaction to fire
Flame Spread ≤ 25Smoke Development ≤ 450
Certification
ASTM F793 / F793M-15 · CAT. V

S-FIBER

Fibreglass

Water-repellent fibreglass paper for wet areas, bathrooms, shower interiors and hospitality spaces. Highly resistant to moisture absorption, tension, rubbing and chemicals. Produced with odourless inks.

Fibreglass wallpaper

Technical data

Roll
95 cm
Care
Washable
Reaction to fire
B-s1, d0
Certification
UNI EN 1049-2 · ISO 3374

S-BIOECO-RICE

Recycled rice-starch cellulose

Recycled cellulose wallcovering made of rice starch, fully compostable and fire retardant.

Technical data

Roll
65 cm
Care
Dry cloth only
Reaction to fire
B-s1, d0
Certification
EN 15102:2007+A1:2011

S-GLIMMER

Cellulose-polyester non-woven, vinyl resin and mica powder

Wallcovering with polyester fabric on cellulose-polyester non-woven with vinyl resin and mica powder. The mineral powder inserts give the surface a faint sparkle.

Technical data

Roll
50/100 cmin 50 cm drops
Care
Dry cloth only
Reaction to fire
B-s1, d0
Certification
EN 15102:2007+A1:2011

S-GOLD

PVC-coated non-woven, gold finish

Wallcovering with PVC-coated non-woven. Suitable for black-and-white or greyscale designs. The gold finish gives the substrate a textured, shiny surface.

Technical data

Roll
50/100 cmin 50 cm drops
Care
Dry cloth only
Reaction to fire
B-s2, d0
Certification
EN 15102:2007+A1:2011

KANT

Non-woven first layer, Fil Posé second layer

“Fil Posé” silk-effect fabric with a fine, slightly irregular weave. The surface looks and feels silky and textured.

Technical data

Roll
50/100 cmin 50 cm drops
Care
Dry cloth only
Reaction to fire
B-s1, d0
Certification
EN 15102:2007+A1:2011

Use only neutral detergents on the washable substrates.

Go to the designs

Materia Urbana

Its certifications, notably for fire resistance, antibacterial treatment and resistance to abrasion and impact, make the substrate suitable for contract and residential projects.

The embossing creates a raised surface that reproduces a textile weave and is pleasant to the touch.

Go to contract wallpapers

Technical data sheet

Nature of components
Non-woven and PVC
Look
Non-woven substrate, embossed in relief
Type of print
Gravure printing
Recommended use
Indoor: residential, hospitality, retail, culture, business and yachting
Approximate total weight
420 g/m²
Roll size
H 106 cm × L 1000 cm
Reaction to fire
B-s2, d0

S-RUG

S-RUG rugs come in round or rectangular formats. Our printing system can produce a single piece, in standard or custom sizes. The rugs are made of 100% polyamide.

Standard sizes: circle 190×190 cm · rectangle 180×120 cm

The materials are tested and certified for wear and maintenance. In 90% of cases the rug can be washed and stains removed with cold water alone; tougher stains can be treated with suitable fabric products.

Go to rugs

S-RUG / Sense

Composition
Polyamide PA 6.6
Pile height
10.5 mm
Backing
Felt Back Eco
Total weight
1,400 g/m²
European fire class
DIN EN 13501-1 Cfl-s1

S-RUG / Urban

Composition
Polyamide PA 6 Econyl
Pile height
9.5 mm
Total weight
1,200 g/m²

S-ACOUSTIC

S-ACOUSTIC is a sound-absorbing panel made in custom shapes and designs. It can feature designs from the Styl’Editions catalogues and so be matched with the wallpapers. It suits contract and HoReCa projects.

The panels can be installed even where a traditional suspended ceiling cannot be fitted, and they let air and light circulate. On walls or ceilings they reduce reverberation.

S-ACOUSTIC · mineral fibre

Material
Glass wool
Reaction to fire
Euroclass A2 (A2-s1, d0)
Finish
Plaster-effect mineral fibre with natural binders, low formaldehyde content
Standard thickness
40 mm
Shapes
Round, square, rectangular or any geometric shape; suspended panel with painted edges, without profiles and with perfect 90° angles
Rectangular sizes
40×180 · 60×120 · 60×180 · 60×240 · 60×300 · 120×180 · 120×240 · 120×300 cm
Square sizes
60×60 · 120×120 cm
Round sizes
Ø 30 · Ø 60 · Ø 80 · Ø 120 cm
Absorption · wall panels
Practical coefficient αp up to 1.0 for frequencies above 500 Hz
Absorption · suspended panels
Practical coefficient αp up to 0.9 for frequencies of 1000 Hz
Humidity resistance
Permanent ambient RH up to 95% at 30 °C without sagging, warping or delaminating (ISO 4611)
Sustainability
Glass wool made with 70% recycled glass, low CO₂ emissions in production, 100% recyclable, improves indoor air
Graphics
All the textures from the Styl’Editions catalogues; customised graphics and non-standard sizes on quotation
Edges
White; for coloured edges the cost will be quoted on request
Application
On walls, hung from the ceiling with a suspension kit, or as room dividers
Warnings
Store indoors; clean with a vacuum cleaner or a dry cloth

S-Acoustic Fabric · polyester fibre

Material
Polyester fibre: non-toxic and hypoallergenic
Reaction to fire
Fire-retardant material, Euroclass B-s2, d0
Hygiene
Naturally resistant to mould, mites and bacteria
Thickness
40 mm
Standard sizes
120×60 cm · Ø 95 cm · Ø 110 cm
Maximum size
120×300 cm, with custom rounded or 90° corners
Customisation
A design of your choice on one side
Edge finish
White or black fibre
Application
Ceiling: glued or fixed flush · suspended baffle · wall: glued or fixed flush
Warnings
Store indoors; clean with a vacuum cleaner or a dry cloth

Go to acoustic panels

Ceramic slabs

The design is digitally printed on the porcelain stoneware slab. Every product in the catalogue can be printed on a ceramic slab and adapted to the needs of the project.

A team of graphic designers, artists, designers and architects develops made-to-measure products for one-off projects, franchises and hospitality.

Go to ceramicsGrandi Lastre

Technical information

Material
Porcelain stoneware
Size
100×300 cm or made to measure*
Thickness
from 3 mm
Printing technology
Digital printing
Graphics
Styl’Editions R&D collections · Styl’Editions Design collections · Customised*

* Quotation on request

MDF panels

The MDF panel goes through a fully digital wood-panel finishing process. A raw panel becomes a finished, customised and lacquered panel (matt, 3D texture or high-gloss), with no printing cylinders or plates. It can be used for wall coverings, horizontal surfaces and furniture elements.

The panel is made from FSC®-certified raw materials with no added formaldehyde and high-solids lacquers, and its VOC emissions are negligible.

Finishes: matt · gloss · semi-gloss · 3D texture

Industry standards

Cold-liquid resistance
UNI EN 12720:2013
Scratch resistance
UNI EN 15186:2010
Abrasion resistance
UNI EN 15185:2011
Light exposure
UNI EN 15187:2007

Need a technical data sheet?

Contact us for product information, details of resellers or technical support. Data sheets and samples are available on request.

Request information